Introduction

Thanks for visiting my blog.

I'm a watch enthusiast.

I love collecting watches, but I also love making them.
I created this blog to record my experiences and information about watches, watch modding, and watchmaking.


My native language is not English, so I'm using a translator to write this blog. The words may be a little awkward, so please understand.

Comments

Post a Comment

Popular posts from this blog

[Watchmaking] EP.5 Painting a watch dial - UV Printing

Image
Perhaps one of the easiest ways to create a watch dial is to 'print' it. Even on watches on the market, various printing techniques are used, such as silk screening and pad printing, which are often used to print logos or text on pre-painted dials. UV printing is a relatively new type of printing method, in which UV ink is sprayed from a nozzle like an inkjet printer, while at the same time the ink is hardened by a UV curing lamp. It can be used to print on almost any type of surface, and is characterized by the durability of its results. Another great advantage is that most UV printers support white ink, although this may vary from printer to printer. There are many applications, such as buying a watch dial without a logo(sterile dials) and printing your own logo on it with a UV printer. With all of these advantages, I decided to try making dials with UV printing. The problem was getting a UV printer. UV printers are too expensive to buy, and they need to be installed in a w...
Read more

[Watchmaking] EP.10 Printing logos and text on the watch dial

Image
Many people want to personalize their watch dials with their own logo or text. In fact, there are sellers on online sites like aliexpress who offer to make dials for custom orders. I want to explain the different ways to print logos and text on the watch dials. UV Printing This is the first method I tried when I started making watch dials (see link for details). You can easily find sterile dials without logos and lettering on aliexpress or ebay, and you can use UV printing to print logos and lettering on these dials. The quality should be good because it is done by professionals. The disadvantage is that the result is too flat. Silkscreening This is a popular method for making watch dials. I wanted to try silkscreen, so I contacted a shop that makes silkscreen screens, but they told me that my design had very thin lines and small letters, so it was not possible to print with ink and solvents which are usuable at home, but only possible with industrial ink and solvents. Pad printing ...
Read more

[Watchmaking] EP.13 Making a full lume dial - Planning

Image
 I previously posted about dials made with UV printing. ( link ) The dial on the right is the one that I made the watch with, and you can see the circular scratch in the center. This is where the dial touched the hour hand. There were two problems with the dials I made at the time - The metal dial base was 0.5mm thick, and I didn't thin it down. - It was bent instead of flat (ordered from laserboost, see previous post ). Moreover, the watch was powered by the quartz movement which made the watch constantly run, and one day I took it out of the watch box and there was the scratch like this. So I decided to make a new dial. At the time, I was a little tired from all the trial and error with the yellow diver watch . I wanted to do it in an easier way this time. One easy way to print a dial is to use a decal. (see previous post ) Think of it as applying a clear sticker, but decals are much thinner and have tighter fit than stickers. So far, I've been using a custom laser-cut meta...
Read more